Browse Categories

"1918" Peace Silver Dollar "Broken Sword" over-strike, High Relief, WW1 100th Anniversary


Your Price: SOLD OUT
Out of stock
Item Number: mm_0100_1918_A
“1918” & "1965-D" Over-Struck Peace Silver Dollars – Production Blog

2018 is the 100th anniversary of the end of hostilities in World War 1. The Peace Dollar was first minted in 1921 to commemorate the “peace” following the end of WW1. But WW1 was an epic failure on the part of world leaders for letting it happen in the first place, and for mismanaging the aftermath which lead to WW2 and other problems which continue to this day. In prophetic fashion, the intended final design for the reverse of the 1921 Peace Dollar included the Eagle clutching a broken sword. At the time, most people felt that the broken sword symbolized defeat, not peace or victory. So the sword was removed from the master hub before the working dies or coins were made.

 

Chronology of events regarding the "Broken Sword" Peace Dollar design:

 

A.)  A design competition was conducted for the new "Peace" Dollar by the US Mint, with James Earle Fraser managing it. This was late in 1921 and time was already extremely short, given that the Treasury desired to issue the new coin before the end of the year.

B.)  One of the invited artists/sculptors was Anthony De Francisci. His initial submission consisted of one obverse design and two reverse designs. All three were submitted as plaster models, along with photographs of each. The obverse was similar to the final coin, except for having a Roman numeral date and slightly different facial profile. One reverse was similar to the final coin, but with a slightly shorter and narrower Eagle. The other reverse was significantly different and it showed an Eagle breaking a sword in its beak.

C.)  After reviewing the models submitted, the De Francisci design was chosen, with certain revisions desired. With Fraser's assistance, De Francisci prepared a new model for the obverse with a normal "1921" date (with dots on either side) and a modified facial profile. The reverse Eagle was made slightly wider and taller, the word "PEACE" was added to the crag below the Eagle, and a broken sword was added, laying horizontally and clutched by the Eagle. De Francisci's other (rejected) reverse design had a broken sword. It is not entirely clear what prompted De Francisci to add these two new elements to the reverse. The Commission in charge of choosing the design may have thought that the broken sword, in conjunction with "PEACE", adequately conveyed the message that the coin was supposed to present.

D.)  In New York, Fraser kept plaster models of the final obverse and reverse designs while De Francisci travelled to Washington DC on 19 December with identical plasters. These were shown to US Mint and Treasury officials, as well as President Harding. The designs were accepted by all. De Francisci telephoned the good news to Fraser. Fraser suggested that bronze casts be made from the fragile plasters he had in New York. One of each was made at a cost of $15 per. Presumably, the dots on either side of the date were removed from the obverse plaster before the bronze casting was made. A later (26 December) letter from Fraser to Mint Director Baker mentions "... an added expense of $30 for two bronze casts of the models of the Peace Dollar".

E.)   On 21 December the plaster models and bronze cast arrived at the Philadelphia Mint. This is stated in a letter written to US Mint Director Baker from Philadelphia Mint Superintendent Styer :

I beg to advise you that we received at 2:30 P.M. today the plaster casts of both sides, and bronze castings of the obverse side of the models for the "Peace Dollar". The messenger who delivered these models stated to Mr. Morgan that Mr. Fraser said that the casting was poor, and suggested that we get an electrotype from obverse as well as the reverse side and if better than the one made in New York, to use it. Mr. Morgan is of the opinion that Mr. Fraser meant the casting was a little rough but he thinks it is not so much so as to give us trouble in reduction. The bronze casting of the reverse was a failure and we must now get our electrotype from the reverse plaster cast here. It would be impossible to get electrotypes of both sides and make our reductions in time to produce coins this year. Mr. Morgan is quite satisfied that he will be able to get a satisfactory reduction from the casting made in New York. Unless something unforeseen happens, and by using the New York casting, we ought to have dies for coinage by December 29th.
Respectfully, Freas Styer, Superintendent

That letter explains a lot. The New York bronze cast of the obverse was used in reduction to make the obverse master hub. An electrotype "galvano" was made at the Philadelphia Mint from the reverse side plaster. This galvano was used in reduction to make the reverse master hub (which included the broken sword).

F.)   News reports of the broken sword design resulted in a public reaction against it. The general sentiment being that it symbolized defeat, not Peace or Victory. Available time was insufficient to make a new plaster, casting, galvano or master hub without the sword. So De Francisci was asked by Fraser to travel to the Philadelphia Mint on 23 December and oversee Morgan's work on the master hub. Morgan carefully removed the sword from the one and only reverse master hub. A master die was then made from that hub and Morgan engraved some new details on that master die to fill in the area where the sword was removed. Working hubs, working dies, and finished coins were then made from there. Due to the additional transfers required to do this, it is possible that some detail was lost resulting in a generally soft appearance of the reverse on the struck coins.

G.)  Some time after the first coins were struck De Francisci made an additional plaster model of each side, possibly for sentimental and/or promotional purposes. These have slightly revised details (different than the actual coins) and they lack the broken sword.

H.)  Conclusion/Conjecture:
It is probable that the “failed" broken sword casting that Styer mentioned was not sent to the Philadelphia Mint and it likely remained in private hands.

In late 2016 this casting, apparently, was discovered by Daniel Carr. It was being offered for sale on the internet by a “picker” who presumably picked it up at a garage sale or flea market. Shortly thereafter, it was acquired by Daniel Carr and Moonlight Mint. The full significance of the item was not initially appreciated by the parties involved. The casting exhibits detail and relief that is superior to any struck coins issued by the US Mint, including the 1921 “high-relief” proof issue.

An image of the casting is shown above. The hole that was drilled in it may have been a way to mark it as rejected, as well as a hanging point for display by the owner. The reason that the casting was deemed a failure is unknown. But many things can go wrong. A casting can come out warped (coins made from it wouldn't stack very well). Or a casting could have localized imperfections such as galling, especially on steeper relief slopes. Although not severe, the broken sword bronze casting exhibits both of these defects.

Bill Fivaz photographed the original obverse bronze cast on a visit to the Philadelphia Mint archives some years ago. Fivaz noted a somewhat rough texture on the obverse cast, which matches the texture of the reverse cast. It is interesting to note that he did not encounter any bronze casting of the reverse in the Philadelphia Mint archives. That fits with the Steyer letter, that the reverse bronze casting was not sent to the Philadelphia Mint and that is why it turned up in private hands later on.

This “broken sword” casting was scanned in 3D at high resolution and used in a digital reduction process to produce the die which was used for the reverse of the “1917” fantasy-date over-strikes. Once scanned, the slight warping was corrected by straightening the scan. The original casting has a diameter of 7.5 inches. After an exact 1:5 reduction, the diameter of the die engraving is the appropriate 1.5 inches. With an identical 1:5 reduction of the relief height, the depth of the engraving is 0.030 inches, which is TWICE that of the actual 1921 “high relief” Peace Dollars produced by the US Mint.

 

Peace Dollar Depth of Relief

Obverse

Reverse

 

“Broken Sword” casting (after 1:5 reduction)

 

0.030”

1921 “High Relief”

0.030”

0.015”

1922-1935 low relief

0.016”

0.014”

 

Morgan Dollar Depth of Relief

Obverse

Reverse

 

1879-1904

0.014”

0.013”


So it is apparent that even on the 1921 high-relief issue, the US Mint had already reduced the reverse side relief height by HALF of what was originally intended by De Francisci. The later low-relief Peace Dollars had significantly lower relief on the obverse, but only slightly lower relief on the reverse compared to the 1921 high-relief issue.

The “1918” fantasy-date over-strike obverse was modeled after the 1921 high-relief issue and has the same obverse relief height but with improved central hair details. The reverse exhibits the FULL intended detail and relief (0.030”), as well as the broken sword. No other Peace Dollar comes close, and that is readily apparent when viewing one of these over-strikes in hand.



Do not attempt to use these as legal tender. This product is NOT endorsed or approved by the US Mint, US Treasury, or US Government.

Product Reviews

(10 Ratings, 5 Reviews) Average Rating:
ratingratingratingratingrating
ratingratingratingratingrating
Wonderful Piece
Greg Fotty (Orange County, NY) 6/17/2018 6:59 AM
Received my 1918 Peace Dollar Over Strike and I have to say as usual I was NOT disappointed. Mr. Carr delivers high quality workmanship that one would think came straight for the U.S. Mint if I didn't know any better. Unwrapping the piece the first thing you notice is the beautiful luster that is almost matte. Followed by the sharp details, truly a masterpiece. Cant wait for the next one!
ratingratingratingratingrating
BEAUTIFUL
Glen (San Antonio, TX) 4/17/2018 10:21 AM
Beautiful high relief design, both obverse and reverse.
ratingratingratingratingrating
Beautiful Details
William Roberson (Danielsville, GA) 4/12/2018 9:45 AM
I bought a High Quality 1965 Fantasy Peace Dollar from Daniel some years back and later sold it and kicked myself every day for doing so. It was also a beautiful creation. This one is even better in my opinion with its high relief and flawless. What it must have been like many years ago holding a freshly minted 1921 Peace Dollar - the closest thing to that with this overstrike. Great job on this one Daniel. Thank You!
ratingratingratingratingrating
Beautiful
Michael B. (Charlotte, NC) 3/21/2018 3:52 PM
This is my first purchase from Mr. Carr and Moonlight Mint. And I could not be happier. This over-strike is extremely well executed. It not only shows the tell-tale "apple-cheek" one would find on well-struck examples, but also a dramatic depth/relief added to the reverse from the original "Broken Sword" casting. All I can say is Bravo and Thank You! I can not wait to see what's next!
ratingratingratingratingrating
A visual masterpiece
J Grove (Pennsylvania) 2/26/2018 2:01 PM
I was lucky to purchase a 1917 Broken Sword Peace Dollar last year, and this 1918 variety is just as fantastic, if not better. The highest points of the hair near Liberty's ear are well detailed, along with a stunning obverse high relief, at the intended 0.03 height. The subtle concave fields reflect spectacular cartwheel luster, with barely a hint of any underlying offset to the original strike. This is a true masterpiece, worth every dollar, and my new favorite "dollar".